|
|
|
|
|
101
|
ADAPTER
Brass adapter, adapts flexible connector to 3/4"
male pipe thread
|
|
|
|
AMMONIA UNION
Provides separable joint for serving
rigid pipe mounted items. Forged Steel- tongue and groove with lead
gasket.
|
|
|
104
|
CHLORINE GAS FILTER
This filter has two chambers. The lower portion acts
as a trap for liquid impurities. The upper portion has a removable filter
cartridge. The filter is made of cast iron
with 1" pipe threads for inlet and outlet
|
|
|
104A
|
FILTER PADS (SET OF 4)
Used with Item 104 Chlorine Gas Filter
|
|
|
104B
|
LEAD GASKET
Used with Item 104 Chlorine Gas Filter
|
|
|
104C
|
FILTER INSERT (BASKET)
Used in Item 104 Chlorine Gas Filter
|
|
|
|
CHLORINE GAS FILTER
Basket type inline filter for gas pressure
piping. Forged steel with removable monel screen.
|
|
|
|
FLEXIBLE CONNECTOR
Cadnium plated 3/8" Copper tubing.
|
|
|
|
FLEXIBLE HOSE
Full 1/2" ID Teflon TFE Hose for Full 1/2"
open flow area and faster transferring. 375 psig max.working pressure.
Two thick kynar PVDF braid reinforcements.
|
|
|
|
GAS SUPPLY HEADER
Dimensions must be furnished for price and delivery. |
|
| 108B
|
HEADER AND HEADER FRAME Headers
are furnished with S/80, CS pipe, 2000 # forged steel fitting in 3/4"
or 1". Header frame is 3 x 3 x 1/4 angle iron for use with horizontal
ton container manifold. |
|
|
|
LEAD GASKET
|
|
|
|
LEAD GASKET
Ammonia Union,
|
|
|
|
LEAD GASKET
Filter Gasket
|
|
| 110
|
PRESSURE GAUGE
0 to 200 PSIG - Diaphragm protected, 2" diameter,
with fluorolube fill, 1/4" NPT female connection. |
|
| 111
|
PRESSURE SWITCH
Adjustable high or low pressure, diaphragm protected,
fluorolube filled, 1/4" NPT female connection. |
|
|
|
HEADER VALVE
Naval Bronze for use in manifold assemblies for connection
to flexible connectors. |
|
|
|
INLINE VALVE - N.P.T.
Ball valve for rigid pipe runs. Carbon
steel body with monel ball and teflon seat.
|
|
| 114
|
ISOLATION VALVE
Used for isolating flexible connector and
manifold while changing cylinders. |
|
|
|
PRESSURE REDUCING VALVE
For reducing variable high pressure Chlorine, Sulphur
or Ammonia to constant low pressure. Inlet and outlet are 3/4" N.P.T.
female connections. |
|
| 116A
|
WRENCH - STANDARD F&P
Multipurpose wrench for use in opening cylinder, and header
valves, and tightening packing nuts. |
|
| 116B
|
WRENCH - STEM & CAP
Multipurpose wrench for use in opening cylinder, and header
valves, and tightening packing nuts. |
|
| 116C
|
WRENCH - TWISTED STEM &
CAP
Multipurpose wrench for use in opening cylinder, and header
valves, and tightening packing nuts. |
|
| 117
|
YOKE
provides a direct mechanical type compression seal for
connection between flexible connector and container valve or header valve. |
|
| 117B
|
YOKE KIT TO INCLUDE:
1 Ea. Item 117 -Yoke
1 Ea. Special Adaptor
1 Ea. Monel Coupling |
|
| 118
|
YOKE ADAPTER
Used with yoke (Item 117) to connect flexible connector
to container valve or header valve. |
|
| 119
|
TONTAINER BLANKET COVER
Used for covering One Ton Cylinders. |
|
| 123
|
TIE DOWNS FOR ITEM 119
Used to tie down Item 119 Blanket Cover to the One Ton
Cylinder. Qty.12 per Blanket. |
|
| 125
|
SILICONE GREASE
Hi-vacuum grease. Used to lubricate o'rings and related
material for use in water/wastewater service. |
|
|
|
SOLENOID VALVE
General purpose valve in various body materials, pipe
sizes and operating press. 2-way packless solenoid valve for both normally
open & normally closed operation.
|
|
| 127
|
PM KIT FOR VAC.REG.
O'rings, Gaskets, Springs and all necessary parts for
preventative maintenance. |
|
| 128
|
PM KIT FOR EJECTOR
O'rings, Gaskets, Springs and all necessary parts for
preventative maintenance. |
|
| 129
|
PM KIT FOR FLOWMETER
O'rings, Gaskets, Springs and all necessary parts for
preventative maintenance. |
|
| 130
|
PM KIT FOR MANIFOLD
O'rings, Gaskets, Springs and all necessary parts for
preventative maintenance. |
|
|
|
